JET SYSTEM
SPECIFICATIONS
JET SYSTEM, THE SMART WAY TO MANAGE YOUR SAFETY SYSTEM
This configuration of the system gives complete control and feedback of your conveyor and elevators avoiding all associated hazards associated with under speed, misalignment, level & choke control, bearing and motor temperature which are the main ignition sources in explosion risks. By notifying you directly on the defects and performance via your laptop, tablet or mobile phone you can effectively manage your plant anywhere on the globe ensuring your operation remains efficient with reduced downtime.
.
- M-JET+ or M-JET MONITORS THE FOLLOWING:
- Under speed due to belt slip on the pulley. To check comparing with the nominal speed.
- Bearing temperature using sensor PT100 or NTC.
- Belt misalignment using sensors with or without contact.
- Material jam in conveyor entry or exit using capacitive sensor.
- Chain elongation measured by inductive sensor and targets.
- Motor power measurement with specific electrical consumption.
- Shaft position measured by sensor 4-20mA.
- THE OPERATING CONTROL OF THE SYSTEM IS REALIZED BY OUTPUT RELAYS:
- Directly on the power relay of the motor.
- By the global PLC of the facilities
- VERIFYING THE CONVEYOR OPERATION CAN BE ACHIVED BY:
- On the computer screen by internal website (directly with laptop or by Network LAN)
- By message on the email box (events and maintenance operation plan)
THE HAZARD MONITORING DEVICES ARE ABLE TO MONITOR BUCKET ELEVATORS, BELT CONVEYORS, CHAIN CONVEYORS AND SCREW CONVEYORS
Our hazard monitoring system analyses the data sent by the sensors installed on the equipment and save the eventual defects events. According to the setting, the M-JET+ or the M-JET sends alarms and commands the stopping of the conveyor.
